MADS Smarty Programmer "Power on Demand" S-06 PoD

MADS Smarty Programmer "Power on Demand" S-06 PoD
Brand:MADS Electronics
Product Code: S-06POD
Availability:In Stock
Price: $685.00

Fast guide to  Smarty’s special Features

CaTCHER software's inside
Ten different  performance levels.
Fastest download in the industry, up to three times faster than 
the competition, a typical ECM update takes about 3.5 to 5 
minutes, depending on the truck model.
ABS tire height updates in just few seconds.
Not traceable in the stock setting. Smarty leaves no footprint.
Manual High Idle is enabled in all softwares
Reads  Diagnostic Trouble Codes in plain text.
No tools required, no fuses to pull.
USB built in for simple updates .
Most complete keyboard in the industry.
Reliable, it works off your OEM hardware.
Programmable Speed Limiter from 25 to 250 mph
Power on Demand
Fast guide to Smarty's software levels
 
The horsepower settings. except #0, all other softwares have a 
modified "Torque management" ( TQM ). The throttle response 
is greatly improved but is set to a save limit. With "Save" I mean 
save for your tranny and rest of the driveline.
 
SW # 0 : Half power
SW # 1 : 30 Hp increase, with added timing .
SW # 2 : 60 Hp increase, no added timing.
SW # 3 : 60 Hp increase, with added timing.
SW # 4 : 90 Hp increase, no added timing.
SW # 5 : 90 Hp increase, with added timing.
SW # 6 : 130 Hp increase, no added timing.
SW # 7 : 130 Hp increase, with added timing.
SW # 8 : 170 Hp increase, no added timing.
SW # 9 : 170 Hp increase, with added timing.
 
Tested on stock trucks on a Mustang Dyno.
Stock means just that. Stock! Even the air filters were stock...
 
The trucks were S T O C K, even the wastegate settings!
We checked the "baseline" ( the stock truck Hp at the rear 
wheels ) twice in a day in order to be sure about our findings. 
The above declared HP numbers are all rounded down to the 
closest number. For example the 90 Hp file actually did 96 Hp. 
That's a 90 Hp software for me, not a 100. The 170 Hp was 174.
 
Power on Demand
100 power levels selectable in just one second during the 
driving!
It's easy: just type the preferred power level directly on Smarty 
keyboard, from 00 to 99.  That's all!
For security reason, the truck waits that the throttle is released 
before applying the new power level.
 
No trace is left in the ECM!
I herby CLAIM that SmartyCR is the FIRST AND ONLY 
downloader that does not erase any of the stored data in the 
ECM. Smarty does NOT leave any electronic footprints in the 
ECM or any other electronic module in the truck. Smarty does 
NOT set ANY codes once the ECM is set back to stock. Smarty 
does NOT need to have fuses pulled.
 
No matter what the competition claims , in one way or another 
they're ALL detectable.
Smarty is NOT!
 
Yet, Smarty can not do one thing for you. Fix what others have 
broken. Smarty can not restore a key on counter that another 
downloader has erased . Smarty can not fix VIN# troubles 
caused by other products. If your Check engine / ABS light is on 
because another product has screwed your ECM, Smarty can 
not fix it, the other guy HAS to...
 
ABS / Speedo recalibration
The tire height can be adjusted up to 44" in increments of 10 
tenth of an inch in just a couple seconds. Of course, Smarty 
needs to be VIN# locked to the truck in order to get into the ABS 
adjustment section.
 
DTC Code reader
The name says it all.
You can read and erase codes. Codes are displayed also in 
plain English. That's old news by now. Smarty S-03 was the first 
one to provide that utility, others found the idea to be a good 
one too.  
( Smarty does erase ABS codes too but does not display them )
 
ECM update speed
Faster than anything else on the market! Again we've done our 
homework on the protocol. Less than 5 minutes. Three times 
faster than a Star-Scan diagnostic tool or competitor.
 
We have developed our own bootloader in order to not have to 
pull fuses should an update become interrupted for any reason. 
All you have to do is to turn the key off / key on Smarty does 
everything else on it's own.
 
Updates
The CaTCHER softwares as they are today are only a starting 
point. Expect major news in future. We’re for your feedback, 
opinions, likes, dislikes...
We will make Smarty do what YOU want, TOGETHER.

Write a review

Your Name:


Your Review:Note: HTML is not translated!

Rating:Bad            Good

Enter the code in the box below:



Diesel Extreme.com © All Rights Reserved